Rigging Equipment

This flying capstan is a lightweight friction device used to introduce friction into a rope set up to aid controlled lowering of cut limbs. Measuring 265mm x 230mm x 75mm and made from galvanised steel, the THLD1 is an economical lowering device, with its main advantages being light weight and ease of set up. Normally attached to the base of the base of the tree with a loopie or round sling, the lower-wrap can be used in conjunction with a mechanical advantage pulley system for lifting and lowering It has been tested to a maximum breaking strain of 30kN which gives it a safe working load of 6kN. The device comes in a handy zip-up canvas bag.

The Treehog THLD 2 is a heavy duty lowering bollard designed to be attached to base of a tree. It comes with two heavy duty webbing ratchet straps for this purpose, and the kit comes in a handy carry bag made of heavy duty PVC material. The THLD 2 is mounted on the base of the tree with the two ratchet straps and the lowering line is then passed around the main tube a number of times, to introduce friction into the system. This enables the groundsman to control the descent of a cut limb and avoid shock loading of the rigging system and tree. The THLD2 has been tested to a Maximum Breaking Strain of 50kN, giving it a safe working load of 10kN. Two replaceable rubbers on the back of the device offer protection to the trunk.

Heavy duty lowering bollard of galvanised steel construction, with serrated base for extra stability. Designed to be attached to base of a tree, for dismantling and sectioning down stems. (For alternative bollard with rubber tree protectors, please check out our THLD2 bollard.) The THLD3 comes with two heavy duty webbing ratchet straps, and the complete kit comes in a heavy duty PVC carry bag. For use with maximum 14mm diameter rope, this lowering device has been tested to a Maximum Breaking Strain of 50kN, giving it a safe working load of 10kN. Two tie off points are provided at the end of the drum, with lugs to prevent the bights of the rope slipping over.

TheTHLD5Heavy duty lowering bollard of stainless steel construction, with large tube diameter for increased friction

Designed to be the only lowering bollard you will ever need, the THLD5 is rated to a massive 30kN WLL.

Four large rubber feet give great stability against the stem, and 2 heavy duty ratchet straps are provided for securing the bollard in place.

Also included in the kit is a quick release cam-action strap, with a karabiner attached. This can be quickly flipped around the base of the trunk, to provide a handy hanging point for the THLD5, while it is being positioned and secured in place.

All complete in a handy carry bag.

TH2100 Fiddle Block System

Introducing friction at the top of a rigging system is becoming more popular, and the Treehog THRR rigging rings are ideal for this purpose.

Made from solid CNC aluminium and chemically finished with a black abrasion resistant coating, the rigging rings can be spliced into a slings by the user.

By being spliced into a rope, they can be used in many of different configurations, one of the main ones being to create alternative to the standard rigging block.

By adding more rings into your rigging system, (as redirects on separate slings, or by using multiple rings in one sling) you can introduce more friction into your system.

There are no mechanical parts to maintain, the rings are very simple to inspect for safety purposes and come in 4 different sizes (see below).

The smaller THRR rigging rings can even be spliced into retrievable friction savers or other anchor point slings.

The TH2050 is a heavy duty impact block style lowering pulley, of forged aluminium construction, designed to absorb impact during shock loading. Available in a choice of anodised colour finishes and finished round and smooth to avoid rope damage, the TH2050 features swivelling side plates for easy installation mid line, A simple thumb screw operation secures the plates closed, and there is a handy cord for attachment of the rigging block to climbing harness. With heavy duty stainless steel bearings, the large sheave can take rope up to 18mm diameter and has a working load limit of 20kN. Please remember, rigging of loads for dismantling trees is a dangerous operation where many unseen factors affect the behaviour of falling loads. Rigging should only be undertaken by trained personnel.

Conforms to EN 795:2012 Class B & EN12278:2007 Quick Release 1/2 Turn thumbscrew closure Forged alloy construction Stainless steel bearings Max rope dia 18mm Hollow large roller with 20mm dia bore Choice of 4 colours MWL 20kN MBS 100kN

For organisation of the work area and provision of multiple anchor points, the THRP rigging plates come in a variety of configurations and sizes. With holes large enough for most karabiner gates, and smooth anodised finish to guard against rope damage, there are a multitude of uses for these handy items, whether it be from setting up a speed line system; creating a floating anchor point; or to ensure correct alignment of karabiners in complex rope system. These aluminium rigging plates conform to EN 795 (Personal fall protection equipment. – Anchor devices), and can therefore be used as part of a climbing system if required, as well as for rigging set ups.

For organisation of the work area and provision of multiple anchor points, the THRP rigging plates come in a variety of configurations and sizes. With holes large enough for most karabiner gates, and smooth anodised finish to guard against rope damage, there are a multitude of uses for these handy items, whether it be from setting up a speed line system; creating a floating anchor point; or to ensure correct alignment of karabiners in complex rope system. These aluminium rigging plates conform to EN 795 (Personal fall protection equipment. – Anchor devices), and can therefore be used as part of a climbing system if required, as well as for rigging set ups.

For organisation of the work area and provision of multiple anchor points, the THRP rigging plates come in a variety of configurations and sizes. With holes large enough for most karabiner gates, and smooth anodised finish to guard against rope damage, there are a multitude of uses for these handy items, whether it be from setting up a speed line system; creating a floating anchor point; or to ensure correct alignment of karabiners in complex rope system. These aluminium rigging plates conform to EN 795 (Personal fall protection equipment. – Anchor devices), and can therefore be used as part of a climbing system if required, as well as for rigging set ups.

Karabiner complies to EN362B, CE0321

Manufactured from 100% high tenacity polyester fibre, our Treehog THLR114 double braid polyester rigging line is designed to provide the best combination of high strength, low elongation and abrasion resistance possible. With a diameter of 14mm (9/16”) the THLR114 has an average breaking strain of 6,350kg and a minimum breaking strain of 5,400kg, this is one of the stronger half inch rigging ropes available on the market. We finish all of our THLR1 rigging ropes with a water and abrasion resistant finish, and they are colour coded according to the diameter and breaking strain: Purple: 12mm (1/2”) 3825kg MBS Green: 14mm (9/16”) 5400kg MBS Yellow: 16mm (5/8”) 6175kg MBS Red: 18mm (3/4”) 8100kg MBS The rope is also available to be purchased in individual lengths by the metre from our dealer network

Manufactured from 100% high tenacity polyester fibre, our Treehog THLR112 double braid polyester rigging line is designed to provide the best combination of high strength, low elongation and abrasion resistance possible. With a diameter of 12mm (1/2”) the THLR112 has an average breaking strain of 4,500kg and a minimum breaking strain of 3,825kg, this is one of the stronger half inch rigging ropes available on the market. We finish all of our THLR1 rigging ropes with a water and abrasion resistant finish, and they are colour coded according to the diameter and breaking strain: Purple: 12mm (1/2”) 3825kg MBS Green: 14mm (9/16”) 4470kg MBS Yellow: 16mm (5/8”) 6160kg MBS Red: 18mm (3/4”) 8100kg MBS The rope is also available to be purchased in individual lengths by the metre from our dealer network.

Manufactured from 100% high tenacity polyester fibre, our Treehog THLR112 double braid polyester rigging line is designed to provide the best combination of high strength, low elongation and abrasion resistance possible. With a diameter of 12mm (1/2”) the THLR112 has an average breaking strain of 4,500kg and a minimum breaking strain of 3,825kg, this is one of the stronger half inch rigging ropes available on the market. We finish all of our THLR1 rigging ropes with a water and abrasion resistant finish, and they are colour coded according to the diameter and breaking strain: Purple: 12mm (1/2”) 3825kg MBS Green: 14mm (9/16”) 4470kg MBS Yellow: 16mm (5/8”) 6160kg MBS Red: 18mm (3/4”) 8100kg MBS The rope is also available to be purchased in individual lengths by the metre from our dealer network.

Manufactured from 100% high tenacity polyester fibre, our Treehog THLR112 double braid polyester rigging line is designed to provide the best combination of high strength, low elongation and abrasion resistance possible. With a diameter of 12mm (1/2”) the THLR112 has an average breaking strain of 4,500kg and a minimum breaking strain of 3,825kg, this is one of the stronger half inch rigging ropes available on the market. We finish all of our THLR1 rigging ropes with a water and abrasion resistant finish, and they are colour coded according to the diameter and breaking strain: Purple: 12mm (1/2”) 3825kg MBS Green: 14mm (9/16”) 4470kg MBS Yellow: 16mm (5/8”) 6160kg MBS Red: 18mm (3/4”) 8100kg MBS The rope is also available to be purchased in individual lengths by the metre from our dealer network.

These round lifting slings (or endless slings as they are sometimes called) are perfect for lowering, load fastening, pulling and towing operations. Made from polyester webbing, and filled with polyester filling for load protection and ease of handling, the THRS round sling range comes in a variety of length, from 2 to 8 metres, and strength ratings from 1 to 5 tons. European made, and fully compliant to EN1492-1 (Textile Slings), our THRS endless sling range is colour coded to the industry standard, and the strength rating is further identified by black demarcation markers down the full length of the webbing (1 stripe=1 ton, 2 stripes =2 ton and so on). Each sling also bears a CE marker label containing the applicable European Norm, identification code and date of manufacture.

These round lifting slings (or endless slings as they are sometimes called) are perfect for lowering, load fastening, pulling and towing operations. Made from polyester webbing, and filled with polyester filling for load protection and ease of handling, the THRS round sling range comes in a variety of length, from 2 to 8 metres, and strength ratings from 1 to 5 tons. European made, and fully compliant to EN1492-1 (Textile Slings), our THRS endless sling range is colour coded to the industry standard, and the strength rating is further identified by black demarcation markers down the full length of the webbing (1 stripe=1 ton, 2 stripes =2 ton and so on). Each sling also bears a CE marker label containing the applicable European Norm, identification code and date of manufacture.

These round lifting slings (or endless slings as they are sometimes called) are perfect for lowering, load fastening, pulling and towing operations. Made from polyester webbing, and filled with polyester filling for load protection and ease of handling, the THRS round sling range comes in a variety of length, from 2 to 8 metres, and strength ratings from 1 to 5 tons. European made, and fully compliant to EN1492-1 (Textile Slings), our THRS endless sling range is colour coded to the industry standard, and the strength rating is further identified by black demarcation markers down the full length of the webbing (1 stripe=1 ton, 2 stripes =2 ton and so on). Each sling also bears a CE marker label containing the applicable European Norm, identification code and date of manufacture.

These round lifting slings (or endless slings as they are sometimes called) are perfect for lowering, load fastening, pulling and towing operations. Made from polyester webbing, and filled with polyester filling for load protection and ease of handling, the THRS round sling range comes in a variety of length, from 2 to 8 metres, and strength ratings from 1 to 5 tons. European made, and fully compliant to EN1492-1 (Textile Slings), our THRS endless sling range is colour coded to the industry standard, and the strength rating is further identified by black demarcation markers down the full length of the webbing (1 stripe=1 ton, 2 stripes =2 ton and so on). Each sling also bears a CE marker label containing the applicable European Norm, identification code and date of manufacture.

These 21mm wide polyester endless sewn loop slings have a multitude of uses in work positioning and fall arrest systems. Very popular with tree climbers, they can be used to fashion foot stirrups; chokered to a branch for a secondary attachment point; attachment of small lowering or redirect pulley, as a grip and pull point when cutting hand held sections; and much more. Tested and certified to EN795B (PPE against falls from height, transportable temporary anchors); EN354 (Personal fall protection equipment - lanyards); and EN571 (Non-destructive testing). These slings are all individually numbered for ease of identification and inspection. Please note when ordering: The length shown is the EWL (Equal Working Length) i.e. half of the overall length of the webbing.